Just kidding, but after I made the video you can check here, where I talk about the new trend of AI creating photography, this idea came to my mind… what if? lol

Let me know what you think about the use of AI in the creation of art!

Some years ago, after I started using the X-Pro1, I wrote an article saying you were one step away from my dream camera. Partially you satisfied me with the firmware options of the X-Pro2 but still something is missing for me. I am satisfied, I sold all my Canon and I have no regrets but a tilt and shift wide angle. But something is missing from my ideal small format camera, not in the quality of the images produced but in the handling.

So here my hopes for the X-Pro3 to make it the perfect camera for me and I’m sure a lot of other users. The most important is the last, so keep reading.

First of all, keep the hybrid viewfinder. It is the essence of the X-Pro series and I really don’t get why people happy just with the EVF don’t buy the X-E or the X-T…

Second, keep the ISO/Shutter speed dial exactly as it is. A lot of old dinosaurs like me love it. It is what we were used to and what we really like.

Third, find a way to put a lock on the diopters dial. It really sucks when it changes taking the camera out of the bag.

Fourth, when I press MENU I want it only on the back LCD… I hate to have to change the view mode to adjust parameters! On this I have the doubt that is already possible to set somewhere… in case, my fault.

For all the rest I have enough trust in you to improve all the parameters of the image and I’m really happy with what I have. So no suggestions here, I do not need millions of ISO, eventually I would love very low ISO like 12 to use wide apertures in the sun. I do not need to make movies and so on. I need a camera to take images. And I need it simple.

So FIFTH, BUT MOST IMPORTANT, please add a switch so I can turn on the camera on a personalized setting without looking at the menus.
It can be a third option on the on/off switch, as it was on an old Pentax… sorry, I do not remember the model.

The position must be OFF, ON and USER.

On the user settings I dream to be able to choose what buttons and dials to keep active or turn off. Something that can be done now via menus.

For example I would love to make inactive the exposure compensation dial, all the buttons on the back, excluded the play button, and keep active only the front OVF/EVF switch, ISO and Shutterspped.
Nothing else for me personally for 90% of the photographs I take, but I would love to be able to set my preferences with a switch, not having to use a menu every single time.
I want to turn on the camera and know I have not to worry about anything but ISO, Shutter speed and aperture.
I want to be sure I did not forgot other settings hidden in menus from a previous shooting.
I really would love that switch.

For the other 10% of pictures I will use the standard ON mode.

Dear Fujifilm, if you insert an User switch I will really be a very, very, very happy man! Ok… just camera happy… but I do not suppose the reader is a shrink or willing to donate me 10 million dollars so I limit myself to this matter…

I’m tired, with all the digital cameras not only Fuji, I always have to check tons of parameters and go thru menus and sub-menus just to check if I forgot something.

I want a simple camera. I know a lot of people want a camera that will also make coffee, but is not me and not a lot of other people. With a switch to turn on the camera with the user settings we decided, everyone will be happy. They can even set the USER mode just for the coffee if they like it. It will be the perfect personalized camera, also a good starting point for the modular concept you are developing for the GFX.

It will be easy to go back and forth from a personalized setting and a generic one, for that percent of pictures requiring unusual settings. And mostly will be easy to go back and avoid mistakes thanks to forgotten parameters in the previous shooting.

Please, please, please, dear Fujifilm, make me camera happy!
And in case there is, between the readers, a good shrink or a billionaire willing to donate… I do not matter more happiness in my life!

BTW, if you wonder about my mental status when I think about the USER switch, I have found the perfect scene from a movie to describe it. It is from What About Bob?, a very fun movie..

Digital or Film? Fuji Acros Digital on a XPro-2 compared to Fuji Acros 100 Film on Hasselblad 6×6… who will be the winner?

Few weeks ago I did a non scientific comparison between black and white digital and film, using my beloved Fuji XPro-2 and a Pentax 67 with Ilford FP4.

The article got a lot of interest and was also published on Fuji X Passion magazine.

I decided to improve the test and use Fujifilm Neopan Acros 100 film, instead of Ilford FP4 and Hasselblad instead of Pentax. The use of actual Acros film instead of Ilford is obvious and needed for a less casual comparison. Hasselblad instead of Pentax is because I suspected some lack of sharpness was caused by the lenses, and since I have used Hasselblad all my life and I’m sure were the best analogue medium format camera and optics, I simply wanted to eliminate every variable related to the lens.

As I said before:

• I know that, scanning the negative, part of the process is still digital so is not perfect
• I do not intend to give all the answers
• I did this just for fun and to understand myself a little better

How did it go this time and who won? Not easy questions!

Technical premise, the Fujifilm Neopan Acros 100 film was developed in Ilfotec HC 1+47 for 8 minutes at 20C, after a 3 minutes prewash in water, and followed by a stop bath and 4 minutes fixing in Ilford Hypam 1+4.
In the image captions there are the specific data for each image.

I started in a snowy day, with absolute flat light and no real highlights in the scenes. The opposite of what I did in the previous test. It was not really a choice, but it was snowing and I wanted to do it anyway… yes, I would rather be in Florida than in the Italian Alps… and not just for the weather!

Fuji Acros 100 – Hasselblad 500 C/M with 80mm f 2.8 – Exposed at 1/60 f 8

First image, a fountain with the church in the background. When I arrived I looked around and thought “1/60 f8” then I took my Minolta Spotmeter and measured the light, exactly 1/60 f8.
I was with Gian Cerato, a dear friend and colleague and asked him what he imagined was the exposure and he told me “1/125 f5.6” and we laughed about the simplicity of film photography. No matter if the best quality is on digital or film, film have the simplicity on its side, once you set the ISO with the film choice there are just shutter speed and aperture that can be set with the old rule 1/ISO at f16 for a sunny day… the table found on every film box!

Please, note the stupidity of Italian bureaucracy that put a bar code for the water service on the fountain… an old fountain with a stupid and ugly white placard very visible from the best point of view. I avoid further comments to not get in jail…

As soon as I took the picture with film, I got my XPro-2 and kept the same settings. Last time I noticed that I always had very underexposed images, even in RAW, if I used the setting from the meter, so I decided to use the Fuji 200 ISO as if it was a 100 ISO to give that stop of overexposure needed in my previous experiment.
Now the image came out one stop overexposed, so I had to trash the jpg and use the RAW and correct one stop… All started to sound strange…

Fuji XPro2 with 35mm f1.4 – 1/60 f8 ISO200 – In camera conversion ACROS simulation

Fujifilm XPro-2 with 35mm f1.4 – 1/60 f8 – RAW transformed in CaptureOne 11

CaptureOne 11 has not the Acros simulation… so no comparison here, but I learned a lesson: something was going on in the camera.  The base ISO did not seem to be constant and I was sure the ISO were set to 200 and not Auto.

So in another location I was more careful on checking the histogram and evaluate the exposure.

Fujifilm Acros 100 with Hasselblad 500C/M and 80mm f2.8 – Exposed at 1/60 f11

As usual the exposure was perfect with film. With digital I corrected a stop for the difference in ISO and came out almost perfectly exposed.

Fujifilm XPro-2 with 35mm f1.4 – Exposed at 1/125 f11 ISO 200 – Acros simulation, in camera jpg

The tonal rendition is really perfect, the differences between the film and digital simulation are very minimum and can depend more on the developer used than on the film and simulation parameters.

I was positively surprised. Fuji really did an awesome job with the ACROS simulation.

We can see very similar results in the other pictures following. And still the XPro-2 set at 200 ISO continued to act properly as 200 ISO!

Hasellblad 500 c/m, 80mm f.28 – 1/60 11.5 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 1/125 f14 ISO 200 – Jpg from camera ACROS simulation

Hasellblad 500 c/m, 80mm f.28 – 1/60 8.5 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 1/125 f9 ISO 200 – Jpg from camera ACROS simulation

Hasellblad 500 c/m, 80mm f.28 – 1/60 f8 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 1/125 f8 ISO 200 – Jpg from camera ACROS simulation

Hasellblad 500 c/m, 80mm f.28 – 1/60 f8.5 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 1/125 f9 ISO 200 Jpg from camera ACROS simulation

For now all is good… exposure perfect using the same setting for film and digital just correcting for the ISO difference.

So I decided to take some pictures inside to test the sharpness and some higher contrast subject.

Hasellblad 500 c/m, 80mm f.28 – 20sec. f8 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 22sec. f8 Jpg from camera ACROS simulation

As usual the film excels in the highlights but this time, with the Zeiss 80mm and Acros instead of FP4 the sharpness is the same as you can see in the 100% enlargement.

Hasellblad 500 c/m, 80mm f.28 – 20sec. f8 Fuji Acros 100 – 100% enlargement

Fujifilm XPro-2 with 35mm f1.4 – 22sec. f8 Jpg from camera ACROS simulation – 100% enlargement

You can read the book covers in both images, and the 100% scan of the film with the Imacon 848 is actually 7400px wide vs. the 6000px of the Xpro-2

At this point I will be curious to test a medium format digital camera (Fujifilm? Pentax? PhaseOne?) against a 4×5″ film.

In my mind I was sure a medium format film was superior to a 24MP aps-c camera regarding linear resolution. I was wrong.

On the next picture I went very high contrast, and again I noticed underexposure on the Fuji XPro-2. The details in the highlight disappear and the shadow become dark, closed. Using the RAW the highlights can be recovered and the dark tones opened up, but the JPG is kind of dark and high contrast compared to the film.

Hasellblad 500 c/m, 80mm f.28 – 2 sec f8 Fuji Acros 100

Fujifilm XPro-2 with 35mm f1.4 – 1sec f9 Jpg from camera ACROS simulation

I had the confirmation that the sensor sensibility was acting strange.

I reread the manual and found nothing useful but… the Dynamic Range settings. I was on Auto, not on a fixed setting. I will have to do some test with also the highlights compensation turned off. Basically I discovered I did not spend the right time to know the camera and test it. RTFM repeated to myself as a mantra… in this case the XPro-2 F manual not mine “Photography: The f Manual“!!

I turned the Dynamic Range to ISO100 and did some other tests, this time in a sunny day and using the Hasselblad 903 SWC, to have a situation similar to the pictures I took in the previous comparison with the Pentax 67 and the 45mm.

Hasselblad 903 SWC – 1/125 f8.5 – Fujifilm Acros 100

Fuji XPro-2 with 16mm f2.8 – 1/250 f9 – Jpg from camera with ACROS film simulation

Still in the digital version we have problems with the highlights and the shadows are a little dark, basically a lot of contrast, but now the medium grey area are exposed correctly. This happens also with the RAW. So I suppose that the Dynamic Range settings changes the ISO sensibility of the sensor, lowering it when there are high contrasts in the scene to try to preserve the highlights.

But, no matter what is done, the highlights always get burned, it’s a problem of the sensor saturation. Film is much more tolerant, and I have to say I love this tolerance.

Now with less contrast in the scene… all is perfect again.

Fujifilm XPro-2 with 14mm f2.8 – 1/250 f11 Jpg from camera ACROS simulation

Hasselblad 903 SWC – 1/125 f11 – Fujifilm Acros 100

If you want to see more pictures let me know and I will do a second part of this article and show the other pictures.

But this is enough for my non scientific conclusion.

• Medium format Acros film on Hasselblad has basically the same resolution of the XPro-2.
• The Fuji lenses are absolutely superb, at the level of Zeiss/Hasselblad!
• Digital sensors sucks in the highlights, even underexposing and recovering the shadows form the RAW file, still there is a sensor saturation that cuts and blows up the sun and similar highlights.
• The tones can be the same in digital and film, is a matter of settings.
• Fujifilm did an impressive job creating the ACROS film simulation.
• All the settings in the digital cameras are a pain in the neck (I wanted to be polite lol)

As personal consideration, I really love both results.
Film for me is simple and I dream of a digital camera without settings except for the ISO/aperture/shutter speed. Nothing more, no display, menus, dynamic range etc. Just a RAW on a memory card and nothing more. But I dream… I know!

I also noticed that, even doing a comparison, when I take the film camera in my hands I already know what I want to photograph, the almost exact point of view and camera settings, with digital I tend to find the picture in the viewfinder and at the end I take always more than one picture. I do not like the digital attitude and I cannot keep the film attitude with a digital camera in my hands. This is my problem, nobody forces me to not use the digital as a film camera!

As soon as I had the Hasselblad in my hands I felt at home for two reasons.
First of all the cameras were so simple, well designed and all similar so was easy to get used to them. With digital I spent the same years than I spent shooting film, but each brand and model is different, with different controls, different menus and too many things to remember. After the first reading of the Hasselblad manual I never opened it again, with digital I need the manual in the bag because every time there is something I do not remember, and yes, supposedly, I can setup the camera and use it as an analogue camera… but then I do not know why but something changes, can be a button pushed in the bag or while I take the camera out, but I had the image proportion changed, the level disappeared, the usual exposure compensation or the diopters correction. At least the ISO are easy on the XPro-2! I know many people hate that ISO dial, I love it!

The second reason is that I love the square format, I’m ok with a rectangular like the 4×5″ or 6x7cm, it is not too much rectangular, but the square is my preferred format. The 3:2 proportion of the 135 full frame or the Aps-C, it is too rectangular for me. It does not reflect my vision.
So, as soon as I took the Hasselblad, I felt connected again, the camera was just a natural extension of my eyes.

I would love to try some medium format digital, to compare it with a 4×5 film and to see if a less rectangular sensor will make me feel again more connected with the camera.

After this comparisons and using again my old working tools I decided how I want the digital camera of my dreams:

• Square format
• No LCD
• Only RAW files produced
• Nothing more than ISO/Aperture/Shutter settings
• In the viewfinder simply exposure data, a grid, the level and the histogram
• Diopter correction and compensation dials, if present, with a lock on them!
• No other settings, I want a sensor that will always have the ISO I choose and always responds in the same way
• A battery lasting at least 3 years!!!

Again, I know I’m dreaming… but dreams are free so why not?!

After this test I’m sure I will continue to use both digital and film. Film photography gives me the pleasure of the mental process, digital the easy “development”.

My next step, as soon as I will have the time, will be to test deeply the Fuji XPro-2 to understand the sensor limits and the effects of the settings also on the RAW format. I imagined that the RAW was not influenced by the various settings, it was my mistake.

All this said, I still love the XPro-2… just, as I said in a previous article… please let me deactivate all the buttons and the &#@%^#* compensation dial via firmware!!! Please Fuji… listen to me… that compensation dial is a pain!!!